Wotofo Profile X RTA Atomiser

Discover Wotofo’s Profile X RTA atomiser and all the great possibilities it has in store for you!

Wotofo’s Profile X RTA atomiser is built for one thing, to satisfy vapers who want a lot of flavour and vapour at the same time, regardless of whether they prefer mesh, single or dual coils!

This beautiful 28mm-wide atomiser has a 3-in-1 deck that’s suitable for single-coil, dual-coil, and Mesh strips alike. You’ll also be able to vape all day long, thanks to its 5ml PCTG and 8ml Pyrex tanks.

Wotofo’s Profile X RTA atomiser on Freemax’s Marvox X Pro mod

Well-designed, compact and generous, a very successful atomiser indeed

If you dream of versatility, vapour and eliquid capacity, all in a practical device with a modern look, then you are in the perfect place. Wotofo’s Profile X RTA atomiser will fulfil all of your vapour cravings and enhance any of your electronic mods.

Its 43.7mm height and 28mm diameter will go well with any device that has a standard 510 connector pin and a similar diameter.

Its sleek frame is beautifully crafted from quality materials. As for its colourful resin 810 drip tip, it adds that touch of originality the manufacturer is well-known for!

Wotofo’s Profile X RTA atomiser

Mesh, single or dual-coil deck, however you wish!

Wotofo’s Profile X RTA atomiser has a very versatile deck. In addition to being able to accommodate different types of Mesh strips, it can also accommodate a single or two coils!

The coils and mesh strips are clamped in place. To do so, simply unscrew and tighten the screws on either side of the deck.

Wotofo includes several strips of nexMESH and some ready-made coils for you to start vaping right away:

• One strip of nexMESH Chill, made from Kanthal A1, with a value of 0.15Ω
• One strip of nexMESH Turbo, made from Kanthal A1, with a value of 0.13Ω
• One strip of nexMESH Extreme, made from Kanthal A1, with a value of 0.16Ω
• Two ready-made coils, made from Framed Staple Clapton Ni80, with a value of 0.33Ω

The manufacturer also includes some cotton laces to complete your coil builds. The kit contains 3 x 6mm-thick laces (perfect for Mesh strips) and 2 x 3mm-thick laces for your single or dual-coil builds.

The single, dual-coil, or Mesh deck of Wotofo’s Profile X RTA atomiser

A honeycomb-shaped top airflow for maximum vapour!

On the Profile X RTA atomiser, the air intakes are arranged in a very specific way. They’re on top of the device, hence the ‘top airflow’ qualifier. This ingenious system is leakproof and honeycomb-shaped for producing lots of thick vapour!

To adjust the airflow, simply turn the ring to open or close the holes to your liking.

The top honeycomb-shaped airflow of Wotofo’s Profile X RTA atomiser

Choose between a 5ml PCTG tank or a 8ml Pyrex tank

Wotofo’s Profile X RTA atomiser is designed to please the chain-vapers, as it comes with two different tanks:

• One 5ml Straight PCTG tank, pre-installed on the atomiser
• One 8ml Bulb Pyrex tank

Wotofo’s Profile X RTA atomiser with the 8ml Bulb Pyrex tank

Both tanks can be refilled using the clever top-fill system of the atomiser:

1. Unscrew the atomiser’s top cap by a quarter turn (the part located right above the airflow ring)
2. Insert the tip of your bottle of e-liquid into one of the two bean-shaped holes
3. Fill up, but not to the brim
4. Screw the top cap back on

The top-fill system of Wotofo’s Profile X RTA atomiser

Contents

• The 28mm Profile X RTA atomiser
• One pre-installed 5ml PCTG tank
• One 8ml Bulb Pyrex tank
• One strip of nexMESH Chill of 0.15Ω
• One strip of nexMESH Turbo of 0.13Ω
• One strip of nexMESH Extreme of 0.16Ω
• Two ready-made Framed Staple Clapton Ni80 coils of 0.33Ω each
• Three cotton laces of 6mm each
• Two cotton laces of 3mm each
• A coil-folding jig
• A set of spare parts
• A user guide

The Profile X RTA atomiser is manufactured by Wotofo.

Contents of the box of Wotofo’s Profile X RTA atomiser