THC X Mike Vapes Blaze AIO Mod

The legendary ThunderHead Creations x Mike Vapes reunites to offer an electronic mod with an AIO (All-In-One) format with a customizable design!

This mod is specially made to hold all your Boro tanks (not included). Supplied in an 18650 single battery, the Blaze AIO delivers a maximum power of 88W.

THC and Mike Vapes slide a fire button and a spare sleeve into the mod's box which allows you to easily customize your electronic cigarette.

The Blaze AIO has a 0.69" OLED screen giving you access to different setting modes with a performing and waterproof chipset.

THC X Mike Vapes' Blaze AIO mod

An AIO mod to your liking

Sporting the mythical rectangular look of AIO equipment, this THC X Mike Vapes mod is made of aluminum alloy. Its dimensions of 85x50.5x23mm and weight of 115g make it a compact, lightweight e-cig. Ideal for a rather tight draw in indirect inhaling (MTL) or even restrictive direct inhaling (RDL) with a 510 drip tip.

The manufacturer gives the possibility to customize the design of your Blaze AIO by including in the box two spare accessories:

• 1 flat Fire button (your mod has a button in relief)
• 1 sleeve: covering your 18650 mod. Tip: use the flat wrench included in the box to take the sleeve out.

From top to bottom on the main side of the mod:

• The Fire button
• The 0.69" OLED screen
• The settings button
• The USB-C port

Handling of THC X Mike Vapes' Blaze AIO mod

A universal Boro compatibility

The Blaze AIO has the advantage of being compatible with most Boro formats.

Are you a keen rebuilder? Take your favorite Boro RBA and insert it into your mod after removing the sliding cover.

This magnetic cover is located on the opposite side of the fire switch. When open, it gives you real-time visibility of the level of e-liquid remaining in your tank.

Equip your mod with the Blaze Bridge Boro Tank (sold separately), an RBA tank designed by ThunderHead Creations.

THC's Blaze AIO mod with the Blaze Bridge Boro Tank (not included)

4 setting modes

After customizing your Blaze AIO, select the functioning mode that suits you among:

• POWER mode: adjust the power from 5 to 88 watts
• TEMP mode: set the temperature according to the type of coil wire used in your build
• BYPASS mode: simulate the performances of a mechanical mod benefiting from electronic safeties
• VOLT mode: adjust the output voltage from 0.5 to 9 volts

A PUFF mode is also available which allows you to check the number of puffs used.

The OLED screen of THC X Mike Vapes' Blaze AIO mod

An 18650 battery for a comfortable capacity

THC and Mike Vapes specially made the Blaze AIO for functioning with an 18650 single battery (not included).

Make the top part of the battery compartment slide so you can insert a battery and respect the polarity sense.

The 18650 single battery compartment of THC X Mike Vapes' Blaze AIO mod

Running out of power? Use a USB-C cable (not included) and plug it into the dedicated port beneath the switches. However, A&L recommends that you charge your battery externally wherever possible, in order to extend its life.

USB-C recharging port of THC X Mike Vapes' Blaze AIO mod

Box contents

• 1 Blaze AIO electronic mod
• 1 spare Fire button
• 1 spare sleeve
• 1 set of tools
• 1 set of spare pieces
• 1 user guide

The Blaze AIO mod is made by ThunderHead Creations (THC) and Mike Vapes. It is delivered without battery and without a USB-C cable.

Box contents of THC X Mike Vapes' Blaze AIO mod