Geekvape Aegis Solo 3 3,000mAh Mod
The third Aegis Solo with built-in battery with tactile unlocking
-
Diameter23mm
-
Maximum power100w
-
Battery typeBuilt-in battery
-
Brand
The Aegis Solo comes back in its third version with a 3,000mAh built-in battery!
If the design is the same, the mod has a Touch Lock system, being a tactile locking/unlocking mode.
Geekvape keeps its IP68 certification making this electronic mod waterproof, dustproof, and shock-resistant.
Its 0.96" screen will you access to several setting modes allowing you to adjust the power from 5 to 100W.
Geekvape's Aegis Solo 3 3,000mAh mod with Vaporesso's iTank T clearomizer
An intuitive locking system
With this third generation, Geekvape keeps the design of its Aegis Solo and slightly change its dimensions (87.8 x 27.9 x 39.8mm) for a diameter with a 23mm base and weight of 155g.
Your mod is also IP68 certified for resistance to water, shocks, and dust.
The main side of the Aegis Solo 3 has from top to bottom:
- 1 Fire button
- 1 0.96" color screen
- 2 setting buttons
Geekvape's Aegis Solo 3 3,000mAh mod
Geekvape innovates in the conception of its e-cigarette equipment by supplying a Touch Lock system to its Aegis Solo 3. The latter will allow you to unlock your mod by simply taking it. On the contrary, putting it back down will automatically activate its lock.
Note that you can disable this function if required.
The locking system of Geekvape's Aegis Solo 3 3,000mAh mod
How does the Aegis Solo 3 work?
With a performing 4.0 AS chipset, the Aegis Solo mod will you access to several setting modes through its 0.96" color screen:
- POWER mode: manual adjustment of the power from 5 to 100W
- SMART mode: automatic setting of the power according to the coil installed into the clearomizer
- BOOSTING mode: selection of the highest power handled by the coil used
- ECO mode: selection of the lowest power handled by the coil
- TCR mode: temperature setting according to the type of the coil wired used (if you use an RBA atomizer instead of the Z Sub Ohm clearomizer)
- MEMORY mode: setting savings (up to 5) according to the type of coil installed
The 0.96" color screen of Geekvape's Aegis Solo 3 3,000mAh mod
A built-in battery rechargeable by USB-C
For this 3,000mAh version of the Aegis Solo 3, Geekvape has a built-in battery with the level of capacity indicated on the screen.
When the time comes to fill it with energy, take the USB-C cable included in the box and connect it on the dedicated port. The latter is on top of the mod under the silicon strip.
The USB-C port of Geekvape's Aegis Solo 3 3,000mAh mod
Box contents
- 1 Aegis Solo 3 3,000mAh mod (built-in battery)
- 1 USB-C cable
- 1 user guide
The Aegis Solo 3 3,000mAh mod is made by Geekvape.
Box contents of Geekvape's Aegis Solo 3 3,000mAh mod
Diameter | 23mm |
---|---|
Maximum power | 100w |
Battery type | Built-in battery |
Height | 87.8mm |
Material | Stainless steel and zinc alloy |
Width | 27.9mm |
Depth | 39.8mm |
Mod type | Box |
Weight | 155g |
Battery capacity | 3000mAh |
Mod type | Electronic |
USB charging | Yes |
Chipset | AS Chipset |
Chipset version | Geek Vape |
Compatible coils | 0.1 to 3 Ohms |
Temperature control | Yes |
Connector pin | 510 |
Configuration | Temperature Control / Variable Wattage |
Expertise level | Intermediate |
IP Certification | Yes |
Battery | Built-in |
Your comment cannot be sent
feedback Report a comment
Abuse report sent
Your report cannot be sent