Voopoo Vinci Spark 100 Mod

Voopoo put a touch of modernity in its conception of electronic mod with its Vinci Spark 100!

This mod has a color screen with an animated display and a magnetic panel covered with 144 LEDs.

Its standard 510 connection allows it to connect any atomizer or clearomizer with a maximum diameter of 28mm.

The Vinci Spark 100 requires an 18650 battery (not included) and offers several functioning modes.

Voopoo's Vinci Spark 100 mod with Horizon Tech's Sakerz Master clearomizer

A luminous design

With its Vinci Spark 100, Voopoo bets on a mod in aluminum alloy and stainless steel, and with a rectangular shape with dimensions of 90x33x28mm for a weight of 94g.

Two magnetic panels surround the main side which offers from top to bottom:

• 1 Fire button
• 1 0.96" TFT screen
• 2 setting buttons
• 1 locking button
• 1 USB-C port

Voopoo's Vinci Spark 100 mod

Its main asset? A panel with 144 LEDs gives it a luminous and modern design.

The luminous animation of Voopoo's Vinci Sparl 100 mod

3 functioning modes

Use the 0.96" TFT screen and the setting buttons to access the menu of your mod and select the mode that suits you among:

• RBA mode: manually adjust the power, from 5 to 100W
• SMART mode: let the chipset automatically define the power according to the coil type used in your clearomizer.
• ECO mode: the mod goes on battery saving mode to preserve the lifespan of your battery

The screen of Voopoo's Vinci Spark 100 mod

To easily transport your equipment, activate the locking switch located on top of the USB port before sliding your mod in your pocket or bag!

The switch of Voopoo's Vinci Spark 100 mod

A capacity in single battery

To supply your Vinci Spark 100, get a 18650 battery (not included) among:

1. Take the magnetic panel out to free the battery compartment
2. Insert your battery in the compartment while respecting the polarity sense indicated
3. Carefully replace the magnetic panel

Tip: Get one or several spare batteries if you go out!

The single battery compartment of Voopoo's Vinci Spark 100 mod

Running out of charged batteries? Take the USB-C cable included in the box and connect it to the mod's port. This is located at the very bottom of the mod's front panel.

However, we recommend that you use an external charger for your battery whenever possible, in order to extend its life.

The USB-C port of Voopoo's Vinci Spark 100 mod

Box contents

• 1 Vinci Spark 100 mod
• 1 USB-C cable
• 1 user guide

The Vinci Spark 100 mod is made by Voopoo. It is sold without batteries.

Box contents of Voopoo's Vinci Spark 100 mod