Geekvape Zeus Sub-Ohm Clearomiser

The Zeus god is back, this time as a clearomizer with an interchangeable coil system. Geek Vape's Zeus Sub-Ohm clearomizer offers a powerful vape that doesn't skimp on flavours, which will be brought out by the mesh coils, specifically designed for it.

The Zeus Sub-Ohm clearomizer is as carefully designed as its older versions and still has that unique look to it. Its beautiful bubble Pyrex can hold up to 5mL of e-liquid. Geek Vape combines the best of both worlds by offering a successful design and a comfortable capacity.

The Zeus Sub-Ohm's air inlets are located on the upper part of the clearomizer to prevent any leaks and facilitate the airflow. This results in a precise flavour rendition and a sizeable amount of vapour. These airflows are of course adjustable.

The Zeus is back !

Geek Vape bolsters its famous Zeus and Zeus X range by adding a clearomiser, the Zeus Sub-Ohm, and it has a lot to offer !

The Zeus Sub-Ohm stands out through its sharp design, its wide diameter of 25mm and its 5ml bulb Pyrex tank. The airflow is mastered from start to finish thanks to its 810 drip tip, guaranteeing a proper cooling of the vapour you inhale.

Geek Vape's Zeus Sub-Ohm clearomizer

Mesh coils

What makes the Zeus Sub-Ohm clearomizer special is its Z coils. Made from mesh, they will last for a long time thanks to their large heating surface. In addition to the massive amount of vapour you'll get, all of your e-liquid flavours will be perfectly reproduced!

The clearomizer comes with:

• one 0.4 ohm Z1 KA1 Mesh coil, for a flavourful vape, to be used between 60 and 70 watts.
• one 0.2 ohm Z2 KA1 Mesh coil, for a large amount of vapour, to be used between 70 and 80 watts.

The Zeus Sub-Ohm's coils

Setting up your Z Series coil

The Zeus Sub Ohm clearomiser is one of the easiest tanks to use. Installing the Z Series coil is no different.

To do so, you must:

1. Unscrew the lower part of the Zeus Sub Ohm (the part with the 510 pin)
2. Pull the old coil out of its slot
3. Insert the new coil in its place, making sure to soak its cotton wick with a few drops of e-liquid beforehand
4. Screw the tank’s lower part back on
5. Fill the tank and vape !

Upwards-facing airflows!

You won't have to worry about leak issues any more. Indeed, the Zeus Sub-Ohm clearomizer breaks the mould as it's fitted with cyclops air inlets on its upper part. Geek Vape have thought about everything, you won't be needing those paper towels!

Its two wide airflows allow you to fine-tune the intake, simply by rotating the adjustment ring. You can then choose between a very airy draw, or a slightly more restrictive draw that'll greatly enhance the flavours of your favourite e-liquids!

The air intakes of Geek Vape's Zeus Sub-Ohm clearomizer

A big bubble-shaped 5ml tank, filled from above

The Zeus Sub Ohm clearomizer is capable of producing a lot of vapour. Therefore, it needed a big tank, and this one is a 5ml Bulb tank. 

The latter is made from Pyrex and will hold a good amount of e-liquid, enough to keep you going all day long. 

Know that there’s a second tank included in the kit. This one is straight and has an e-liquid capacity of 3ml.

To fill the tank, simply remove the clearomiser’s upper part and insert the tip of your bottle of e-liquid into one of the side holes (never in the middle).

Always wait about ten minutes after filling the tank, so that the coil can soak up enough e-liquid.

Filling Geek Vape’s Zeus Sub-Ohm clearomiser

Contents 

• the Zeus Sub-Ohm Clearomizer
• a spare 3.5mL Pyrex tank
• one 0.4 ohm Z1 KA1 Mesh coil
• one 0.2 ohm Z2 KA1 Mesh coil
• a set of spare seals
• a coil tool
• a user guide

The Zeus Sub-Ohm clearomizer is manufactured by Geek Vape.

The contents of Geek Vape's Zeus Sub-Ohm clearomizer kit