Smok TF-D Subtank Clearomizer

The brand Smok presents a clearomizer that is meant only for vaping in direct inhaling (DL).

Its bulb pyrex holds no less than 5.5ml of your e-liquid. Its top-filling system allows you to fill it by simply pushing the top part of the clearomizer.

Through its 510 pin and its diameter with a 25mm base, it can easily be connected to most mods on the market. Note that the bulb Pyrex has a 30mm diameter.

It is compatible with the D-Coils, two (0.15 and 0.23ohm) are included with the clearomizer.

Smok's TF-D Subtank clearomizer on Vaporesso's Gen Max mod

A clearomizer for an airy vape

The TF-D tank is a clearomizer specially made for direct inhaling (DL) and a very airy vape.

Its bulb Pyrex gives it a maximal diameter of 30mm so its outline is perfectly aligned. If you have a mod with a small diameter, use a vape band to preserve your tank.

It has a leakproof system through its top airflow and its top filling system.

Smok's TF-D Subtank clearomizer

The D-Coils

To match the TF-D clearomizer, the brand Smok developed the D-Coils.

To allow you to test several values, the manufacturer added no less than two coils:

• 0.15ohm D-Coil (pre-installed): to use between 55 and 65W. Recommended power: 60W
• 0.23ohm D-Coil: to use between 45 and 55W. Recommended power: 50W

How to change the coil?

As soon as you feel a light burnt taste or a loss of flavors, it is time to change the coil.

Don't hesitate to follow the guide below to learn all the steps:

1. Unscrew the bottom part of the clearomizer
2. Slightly pull on the used coil to take it off
3. Soak a new coil with some drops of e-liquid
4. Insert the latter in its compartment in the same place as the old one
5. Screw the bottom part back
6. Fill your tank with e-liquid
7. Wait for some minutes before vaping so the new coil is correctly primed

A handy top airflow

In order to customize your vape experience, this clearomizer has a notched airflow ring located on top, to avoid leakages.

The more the hole is open, the more the airflow is important and the vape airy.

The airflow ring of Smok's TF-D Subtank clearomizer

How to fill the clearomizer?

To benefit from 5.5ml of capacity, you only need to fill this tank with your favorite e-liquid. For this, you can count on a simple and clean system by the top (top-fill).

Don't hesitate to follow the guide below to know all the filling steps:

1. Push the top part using the arrow as a guide
2. Insert the thin tip of your bottle
3. Fill
4. Close the top cap

If you use a new coil, wait for some minutes so the latter is correctly primed.

The filling of Smok's TF-D Subtank clearomizer

Box contents

• 1 5.5ml TF-D Subtank clearomizer
• 1 spare bulb Pyrex
• 1 0.15ohm D-Coil (pre-installed)
• 1 0.23ohm D-Coil
• 1 set of spare washers
• 1 user guide

The TF-D clearomizer is made by the brand Smok.

Box contents of Smok's TF-D Subtank clearomizer