Smok Morph 3 Kit

If you liked Smoktech's Morph 2 mod, you're going to love the Morph 3 kit! Following the success of its Morph series, the manufacturer decided to create an even more well-finished electronic cigarette.

Comprised of a Morph 3 mod and the famous T-Air Subtank clearomizer, this kit is especially suitable for direct inhaling (DL) enthusiasts. Delivering up to 230W, this electronic cigarette is powered by two 18650 batteries (not included).

Fitted with a 0.96" TFT color display, the Morph 3 kit and its IQ-S chipset offer you two vaping modes: Variable Wattage and Temperature Control (TC).

Smok's Morph 3 kit

A harmonious, impressive kit

Smok keeps the main assets that made the success of its Morph 2 mod and adapts them to the Morph 3 kit: an ergonomic size (47.5x149x32mm), an elegant, high-end structure made from a zinc alloy coated with leather, a dual-18650 battery power supply delivering up to 230W.

On the front side of your kit, from top to bottom, you'll find:

• The 0.96" TFT color display
• The '+' and '-' buttons
• The USB-C charge port

The Fire button can be found on the side of the kit, right below the clearomizer, so your thumb will naturally be positioned on it!

This fancy and modern design is combined with the Legendary T-Air Subtank, a clearomizer fitted with a 5ml Bulb tank and an 810 drip tip. This combo makes a perfectly balanced kit in terms of hues and proportions, a vape as beautiful as it is high-performance!

It is also extremely light for a dual-18650 battery e-cigarette: only 190g!

Handling Smok's Morph 3 kit

A monstrous power: up to 230W!

Press the Fire button 5 times in a row to switch it on. Then, access the menu by pressing it 3 times in a row, and choose between:

• The POWER mode: adjust the power delivered manually from 5 to 230W
• The Temperature Control (TC) mode: this mode is only compatible with a rebuildable atomizer and allows you to adjust the temperature depending on the type of coil wire you use (Ni, Ti, SS316)

The 0.96" TFT color display also gives you access to all the information you need for vaping: power, voltage, coil value in ohms, battery level, and even a puff counter!

In other words, enjoy an incredible e-cigarette, powerful and practical, that can deliver a monstrous power of up to 230W!

The 0.96" TFT color display of Smok's Morph 3 kit

A dual-18650 battery power supply

Designed for massive and flavorful vapor clouds, the Morph 3 kit offers the advantage of combining a great battery life with a tremendous 230W power.

This non-negligible asset is made possible thanks to a dual-18650 battery power supply! Slide your batteries (not included) into the dedicated slot that you can access by opening the hatch below the mod.

The dual-18650 battery slot of Smok's Morph 3 kit

A backup USB-C port

If you ever forget to charge your batteries and don't have access to an external charger, Smok thought of you and fitted its kit with a USB-C port right below the '+' and '-' buttons. Use the included cable to connect your mod to an external power source and charge it!

However, we recommend you use an external charger (not included) to charge your batteries. This will extend their durability and ensure optimal safety.

The USB-C charge port of Smok's Morph 3 kit

The legendary T-Air Subtank clearomizer

There's is no need to present the T-Air Subtank anymore, one of the very best clearomizers designed for direct inhaling in the vape world! Thanks to its massive Bulb Pyrex, this wonderful clearomizer can contain up to 5ml of e-liquid and is compatible with Smok's TA coils. Designed for DL vaping, the Morph 3 kit is delivered with two different TA coils (0.2 and 0.4Ω).

As for the airflow, the T-Air Subtank is fitted with a honeycomb-shaped top airflow system. Not only does it offer you unmatched airy sensations, but it also makes your clearomizer perfectly airtight and prevents leaks.

The T-Air Subtank clearomizer from Smok's Morph 3 kit

Smok's TA coils

As mentioned above, your Morph 3 kit is delivered with 2 TA coils from Smok:

• One 0.2Ω TA coil (pre-installed) to be used between 50 and 70W
• One 0.4Ω TA coil to be used between 20 and 45W

After two to three weeks of use, your coil will start to show signs of wear, such as a flavor loss or a slight burnt taste.

Proceed as follows to replace it:

1. Remove the T-Air Subtank clearomizer from the Morph 3 mod
2. Unscrew the base of the clearomizer to access the coil
3. Pull the used coil to remove it
4. Take a new coil and soak it with a few drops of e-liquid
5. Insert it into the dedicated slot by pushing it slightly
6. Fill the tank and wait for 5-10 minutes before vaping

A 5ml tank with a top-fill system

This clearomizer has a great e-liquid capacity thanks to its 5ml Bulb Pyrex fitted with a handy top-fill system!

To fill your tank, simply follow these few steps:

1. Remove the top cap (twist it by a quarter turn)
2. Insert the tip of your e-liquid bottle into one of the two dedicated holes
3. Fill the tank up to three quarters (never pour anything into the middle chimney)
4. Close the top cap
5. If you use a new coil, wait for 5-10 minutes before vaping to make sure it's primed

The top-fill system of Smok's T-Air Subtank clearomizer

Contents of the box

• One Morph 3 mod
• One T-Air Subtank 5ml clearomizer
• One 0.2Ω TA coil (pre-installed)
• One 0.4Ω TA coil
• One spare Bulb Pyrex
• One USB-C cable
• One bag of spare parts
• One user guide

The Morph 3 kit is manufactured by Smok (Smoktech).

Contents of the box of Smok's Morph 3 kit