Vaporesso Gen SE Kit

The brand Vaporesso presents a kit including a Gen SE mod with a maximum power of 80W and functioning with an 18650 battery (not included). Small and light, it offers an easily transportable solution.

This kit is completed with a 3ml iTank clearomizer, or 6ml with the bulb Pyrex, with refined lines and associating with the famous GTi coils. It is delivered with a 0.2ohm and 0.4ohm MESH coil.

Vaporesso's Gen SE kit

Lightness and smallness

The Gen SE kit stands out thanks to its compact dimensions. Indeed, the 141.4 x 35.6 x26mm will allow you to store it easily in one of your pockets or in a small handbag for example.

Its 161g weight and its curved angles will give you an agreeable handling.

The Gen SE kit presents a main side with:

• 1 Fire button
• 1 0.96" TFT screen
• 2 setting buttons
• 1 ON/OFF switch
• 1 USB-C port

Handling of Vaporesso's Gen SE kit

The brand Vaporesso also offers to customize the display of the mod through three themes: football, UFO, or general.

The animation on the screen of Vaporesso's Gen SE kit

A functioning thought for all

With an AXON chipset, this kit is meant for expert or beginner vapers. You can select between:

• F(t) mode (default): this mode, specific to Vaporesso, progressively changes the temperature, the heating speed, the range, and the pulse interval according to the coil installed and the power selected
• Pulse mode: delivers a regular voltage for optimal flavor production
• ECO mode: manually adjust the power delivered, from 5 to 80W
• VV mode (Vari-Voltage): manually set the output voltage in volts

Also equipped with a SMART mode, you'll benefit from an automatic power adjustment according to the value of the coil installed.

The screen of Vaporesso's Gen SE kit

An 18650 single-battery

Vaporesso made the choice to supply its kit with an 18650 battery (not included). You only need to lift the magnetic compartment door to insert your battery while respecting the polarity indication located on the back.

The 18650 single battery compartment of Vaporesso's Gen SE kit

With a USB-C port on the main side, you can use the cable included in the box to find some percents (%).

Please note that it is better to recharge your batteries with a charger meant to extend the life span of your batteries.

The USB-C port of Vaporesso's Gen SE kit

The iTank T clearomizer of Gen SE kit

Thanks to its 3ml of capacity, the clearomizer on the kit will allow you to vape your e-liquid for a long time.

With an 810 drip-tip, the iTank T is mainly meant for an airy vape in direct inhaling (DL), or in restrictive direct inhaling (RDL).

It is compatible with the GTi coils of the brand Vaporesso. It is delivered with two coils, a first in 0.2ohm and a second in 0.4ohm.

Vaporesso's Gen SE kit

The GTi coils

The Gen SE kit is delivered with two coils of the GTi collection:

• 1 0.2ohm GTi coil: to use between 60 and 70W
• 1 0.4ohm GTi coil: to use between 50 and 60W

As soon as you feel a light burnt taste or a loss of flavors, you'll have to replace the coil of your clearomizer. To help you, don't hesitate to follow the guide below:

1. Unscrew the bottom part of the clearomizer
2. Pull on the used coil to take it off
3. Soak a new coil of some e-liquid drops
4. Insert the latter in its compartment
5. Screw the bottom part of the clearomizer
6. Fill the e-liquid tank
7. Wait for some minutes before vaping so the new coil is correctly primed with e-liquid

A leakproof airflow

Located on the top of the clearomizer, the airflow limits the risks of e-liquid leaks.

If needed, you can adjust the airflow by pivoting the ring, freeing more or less the holes. As a reminder, the more the openings are big, the more the air intake is important and the vape airy.

The airflow of Vaporesso's iTank clearomizer

Up to 6ml of capacity

With a 3ml capacity with the pre-installed straight Pyrex or 6ml with the replacement Pyrex bulb, the iTank T clearomizer lets you vape your recipe for a long time.

Sooner or later, you'll need to refill it, so don't hesitate to consult the guide below for help:

1. Push the top cap of the clearomizer to release the filler opening (press at the red mark)
2. Insert your dropper into one of the two holes in the silicone membrane
3. Pour your e-liquid up to three-quarters of the way into the tank
4. Push back the top cap
5. Remember to wait 5 to 10 minutes before vaping if you're using a new coil

The filling of Vaporesso's iTank T clearomizer

Box contents

• 1 80W Gen SE mod
• 1 3ml iTank T clearomizer
• 1 spare 6ml bulb Pyrex
• 1 0.2ohm MESH GTi coil (pre-installed)
• 1 0.4ohm MESH GTi coil
• 1 USB-C cable
• 1 bag of spare pieces
• 1 user guide

The iTank T clearomizer is made by Vaporesso.

Box contents of Vaporesso's iTank T clearomizer