Geekvape Aegis Solo 3 Kit

Geek Vape presents a complete kit combining the Z Sub Ohm clearomizer with the third version of its Aegis Solo mod.

This electronic cigarette is supplied with a 18650 battery (not included) and delivers a maximum power of 100W.

Clearly meant for an airy draw in direct inhaling (DL), the Aegis Solo 3 kit offers several modes.

IP65 certified, the mod also offers a system of smart unlocking that activates during the handling!

Geekvape's Aegis Solo 3 kit

An intuitive locking mode

The third version of the Aegis Solo kit offers a similar design to the previous one with slightly different dimensions: 137.4 x 27.6 x 40.9cm for a weight of 189g.

You'll find from top to bottom on the main side:

• The Fire button
• The 0.96" color screen
• The setting buttons

Handling of Geekvape's Aegis Solo 3 kit

With a performing AS Chip 4.0 chipset, this electronic cigarette has a Touch Lock system, as handy as it is intuitive. Indeed, a simple contact with the palm will unlock the Aegis 3 mod and by putting it down you'll lock it.

Geekvape has a mod with an IP68 certification, being damage-resistant, dustproof, and waterproof.

The Touch Lock system of Geekvape's Aegis Solo 3 kit

How does the Aegis Solo 3 kit work?

Meant for enthusiasts of airy vape in direct inhaling (DL), the Aegis Solo 3 mod is associated with the Z Sub Ohm clearomizer from the same manufacturer.

According to your needs and vape habits, you'll have the choice between several setting mods, through the 0.96" screen color of the electronic mod:

• POWER mode: manual adjustment of the power from 5 to 100W
• SMART mode: automatic setting of the power according to the coil installed into the clearomizer
• BOOSTING mode: selection of the highest power handled by the coil used
• ECO mode: selection of the lowest power handled by the coil
• TCR mode: temperature setting according to the type of the coil wired used (if you use an RBA atomizer instead of the Z Sub Ohm clearomizer)
• MEMORY mode: setting savings (up to 5) according to the type of coil installed

The screen of Geekvape's Aegis Solo 3 kit

A 18650 single-battery supply

Regarding the capacity of your Aegis Solo 3 kit, Geekvape has an 18650 single battery (not included).

To insert your battery, unscrew the protection cap located under the mod and slide it into the compartment. Make sure to respect the polarity sense.

The 18650 single battery of Geekvape's Aegis Solo 3 kit

Are you out of recharged batteries? Use the USB-C cable included and connect it to the dedicated port, located on the top part of the mod, under a silicon strip.

However, we recommend using an external charger as much as possible to fill your batteries with energy, it will preserve their lifespan.

The USB-C port of Geekvape's Aegis Solo 3 kit

The Z Sub Ohm clearomizer

On top of the Aegis 3 mod, there's the Z Sub Ohm in the 2021 version.

With a diameter of 24mm, this clearomizer has a 5.5ml bulb tank.

It also has a top airflow system and is specially made to receive the Z Series coils of Geekvape.

The Z Sub Ohm clearomizer of Geekvape's Aegis Solo 3 kit

The Z Series coils

Geekvape delivers the Aegis Solo 3 kit with two Z Series coils included, both centered in direct inhaling (DL) for an airy draw. These coils has the advantage to be reactive benefiting of a MESH conception.

You'll find in the box:

• 1 0.2ohm Z Series coil: to use between 70 and 80W
• 1 0.4ohm Z Series coil: to use between 50 and 60W

Please note that the Z Sub Ohm clearomizer is also compatible with a collection of Z Series coils.

To insert the coil into your clearomizer, follow the steps below:

1. Unscrew the bottom part of Z Sub Ohm
2. Soak a new coil of some e-liquid drops
3. Insert the coil into its compartment by slightly pushing it
4. Screw the base of the clearomizer
5. Fill the tank with e-liquid
6. Wait for some minutes before vaping it so the new coil is correctly primed with e-liquid

To take a used coil out of the clearomizer, use the key included in the box.

The top airflow of Z Sub Ohm

The Z Sub Ohm has a leakproof airflow system located on the top part of the clearomizer.

A rotary ring has to adjust the airflow by freeing more or less the two large windows.

Please note that the more the holes are closed, the more your draw will be restrictive, being tight.

The top airflow of the Z Sub Ohm clearomizer of Geekvape's Aegis Solo 3 kit

How to fill your tank with e-liquid?

Another asset of the Z Sub Ohm is its top-filling system.

When the time comes to fill your 5.5ml tank, take an e-liquid bottle with a thin tip, then:

1. Unscrew the top cap of the clearomizer
2. Insert the tip of your bottle into one of the two filling holes
3. Pour your e-liquid, make sure to not pour anything into the central chimney hole
4. Carefully screw the top cap
5. Wait 5 to 10 minutes before vaping if you use a new coil

The filling of Z Sub Ohm clearomizer on Geekvape's Aegis Solo 3 kit

Box contents

• 1 100W Aegis 3 mod
• 1 Z Sub Ohm clearomizer
• 1 0.2ohm Z Series coil
• 1 0.4ohm Z Series coil
• 1 USB-C cable
• 1 spare pyrex
• 1 set of spare pieces
• 1 user guide

The Aegis Solo 3 kit is made by Geekvape. It is sold without batteries.

Box contents of Geekvape's Aegis Solo 3 kit