Eleaf iStick I80 Kit

Eleaf offers a compact and easy-to-use electronic cigarette, meant for cloudy vape enthusiasts in direct inhaling (DL) or restrictive direct inhaling (RDL).

This kit is composed of the iStick I80 mod, an 80W mod supplied by a 3,000mAh built-in battery and rechargeable by USB-C, and with the Melo C clearomizer.

The latter has a 5ml tank and is specially made to hold the EC coil by Eleaf.

Eleaf's iStick I80 kit

The design of iStick I80 kit

With a compact mod made in zinc alloy, the iStick I80 kit has an ergonomic and easy-to-use structure with dimensions of 134.5x36x29mm.

Its main side has:

• 1 Fire button
• 1 OLED screen
• 2 setting buttons
• 1 USB-C port

Handling of Eleaf's iStick I80 kit

A simple and intuitive functioning

With the iStick I80 kit, Eleaf 

According to your preferences and needs, you'll have the choice between two functioning modes:

• Vari-Wattage mode: manually adjust the power according to the value of the coil installed in the Melo C clearomizer, from 5 to 80W
• Smart mode: let the chipset of the iStick I80 mod automatically set the power according to the coil value

Select the mode that suits you through the OLED screen and the setting buttons.

The screen of Eleaf's iStick I80 kit

A 3,000mAh built-in battery

For the capacity, Eleaf equipped the iStick I80 kit with a rechargeable 3,000mAh built-in battery.

The screen displays the charge level in real-time, and the USB-C cable allows you to recharge it quickly.

Find the USB-C port on the main side of the mod, just below the setting buttons.

The USB-C port of Eleaf's iStick I80 kit

The Melo C clearomizer

With a maximum power of 80W, there's no better thing for this kit than a clearomizer for direct inhaling (DL) for airy vape sessions!

Eleaf chose the Melo C, a clearomizer that has already proven itself in the vape universe.

Its large compatibility with the collection of EC coils by Eleaf gives it great use versatility, also allowing it to be used in indirect inhaling (MTL) for a rather tight draw.

The Melo C clearomizer of Eleaf's iStick I80 kit

Two EC2 coils included

Eleaf includes two EC2 coils meant for a cloudy vape with your kit:

• 1 0.5ohm EC2 coil in Kanthal: to use between 30 and 100W
• 1 0.3ohm EC2-M coil (pre-installed) in Kanthal Mesh: to use between 30 and 50W

Note that the Melo C clearomizer is also compatible with other collections of EC coils by Eleaf!

After two to three weeks of use, the coil will start to show some signs of wear (loss of flavors, light burnt taste).

It will be time to replace it with a new one.

For this:

1. Disconnect the Melo C of the iStick I80 mod
2. Unscrew the bottom part of the clearomizer
3. Slightly pull on the used coil to take it off
4. Soak a new coil with some drops of e-liquid
5. Insert it in its compartment in place of the old one
6. Screw the bottom part back

Wait for some minutes before vaping it so the new coil is correctly primed with e-liquid.

The Melo C airflow

Easily and quickly adjust the airflow under the coil thanks to the wheel located on the base of the clearomizer.

Pivot the airflow ring to free more or less the holes: the more air in, the more the vape will be airy!

The airflow of the Melo C clearomizer of Eleaf's iStick I80 kit

A 5ml tank to fill by the top

The Melo C clearomizer has a clear advantage, being easily fillable by the top!

No need to take the mod off when you fill it with e-liquid.

For this, you only have to:

1. Push the top cap at the level
2. Insert the thin tip of your bottle into the filling hole
3. Pour your e-liquid up to three-quarters
4. Push the top cap

Wait for 5 to 10 minutes before vaping it if you use a new coil.

The filling of the Melo C clearomizer of Eleaf's iStick I80 kit

Box contents

• 1 3,000mAh iStick I80 mod
• 1 5ml Melo C clearomizer
• 1 0.5ohm EC2 coil
• 1 0.3ohm EC2 coil (pre-installed)
• 1 USB-C cable
• 1 user guide

The iStick I80 kit is made by Eleaf.

Box contents of Eleaf's iStick I80 kit