Steam Crave Titan Combo V2 Kit

The Titan Advanced Combo V2 by Steam Crave gathers the power of the Titan PWM V2 mod with those of the Titan V2 RDA aromamizer.

Reaching 300 watts, this electronic mod in vari-voltage stands out by its capacity thanks to the functioning with two or four 18650 batteries (not included), an aromamizer in a dual coil of 41mm of diameter, and 20ml or 32ml of capacity!

Warning! Given the power and the particular operation of this kit, it is reserved for experienced vapers, used to VV settings and series or parallel battery builds!

Steam Crave's Titan Combo V2 kit

Mixing of two Titans

With their big sizes, the Titan PWM mod and the Titan V2 RDTA aromamizer are born to be assembled! Resulting in a kit with a 167.5mm height for a 41mm width and a 53.6mm depth.

The Titan Advanced Combo is very sturdy thanks to a composition of aluminum and stainless steel.

Steam Crave thought it to be very ergonomic with a compact format and details that ease the handling.

Handling of Steam Crave's Titan Combo V2 kit

A unique Vari-Voltage mode for a power of 300W

The Titan Combo V2 kit delivers a maximum power of:

• 300 watts with 4 18650 batteries (not included)
• 200 watts with 2 18650 batteries (not included)

The vari-voltage mode (from 0.1 to 8.4V) is accessible through the LCD screen and setting buttons on the main side of the mod.

This screen also indicated the information necessary to your vape: tension, coil, power, battery state, and puff counter.

The performing chipset by Steam Crave offers the protections essential to your vape sessions: against short-circuits, overheating, and overintensity.

Tip: push three times on the Fire button to lock the mod.

The screen of Steam Crave's Titan Combo V2 kit

Two to four 18650 batteries in parallel series build

In terms of capacity, there are two operating possibilities: dual 18650 batteries or quadruple 18650 batteries!

Thanks to a parallel-series build system, you can fit your own four batteries (not included), or just two of them.

Whichever you choose, you'll benefit from high power, all without dividing your capacity!

The dual or quadruple battery compartment of Steam Crave's Titan Combo V2 kit

The Titan V2 RDTA aromamizer

What's better than the Titan V2 RDTA aromamizer to accompany a powerful mod? With its 41mm diameter, its 810 drip tip, and its large build deck in dual coil, this bottom coil is meant for an airy vape.

Your rebuildable builds will be made in dual coil, but also in series or in parallel. It offers numerous possibilities of draw, a ring of e-liquid control, and no less than two tanks of 20 and 32ml!

The aromamizer of Steam Crave's Titan Combo V2 kit

Builds of your choice: dual coil or Mesh coils

Inside your RDTA atomizer is a spacious postless deck. However, unlike its dual-coil counterparts, you won't find four opposite slots for your coils, but six! This feature allows you to create parallel builds, both standard and serial, i.e. staggered.

So, if you start with a parallel dual-coil build with two 0.4 ohm coils, you'll get a final value of 0.2 ohm, while for a series dual-coil build with two 0.4 ohm coils, you'll get a final value of 0.8 ohm!

The dual coil deck of Steam Crave's Titan Combo V2 kit

A multitude of airflow holes

Just below your straight 20ml Pyrex, you'll find an airflow ring, with multiple air intakes.

This large choice will allow you to set precisely the vape sessions desired, from the most airy to the most tight.

To select the draw, you only have to turn this large wheel!

The airflow ring of the aromamizer of Steam Crave's Titan Combo V2 kit

Four Pyrex of 20 and 32ml!

In addition to your 20ml Pyrex, already fitted to your Titan V2 RDTA, Steam Crave has included a spare 20ml Pyrex, as well as two 32ml Pyrex. You can also attach the vape band included in your kit, to reduce the risk of breakage in the event of an unfortunate drop...

Although refilling will be more than occasional with tanks of this capacity, Steam Crave has opted for a top-fill system that's both clean and safe. By removing the top cap from your aromamizer, you'll have access to four large filling windows!

Finally, just above this large air intake knob, an e-liquid control ring lets you lock and unlock your aromamizer, for added safety when charging e-liquid.

The filling system of Steam Crave's Titan Crave V2 kit

Box contents

• 1 300W Titan PWM V2 mod
• 1 Titan V2 RDTA aromamizer
• 1 spare 20ml straight Pyrex
• 2 32ml straight Pyrex
• 1 Steam Crave Vape Band
• 1 ready-made Mesh deck
• 1 coil jig
• 2 ready-made Tri Core Fused Clapton Ni80 coils
• 2 cotton laces
• 1 bag of spare pieces
• 1 screwdriver
• 2 user guides

The Titan Combo V2 kit is made by Steam Crave. Warning, it is sold without batteries.

Box contents of Steam Crave's Titan Combo V2 kit