Dotmod Dotstick Revo V1.5 Podmod

After a successful Dotstick, discover in the video an improved version of their beginner podmod: Dotmod’s Dotstick Revo V1.5 Podmod!

After releasing the Dotstick, the brand is back with an enhanced version of their well-finished podmod made for beginners.

Adopting all the characteristics that made the success of this tube-shaped e-cigarette, namely a max power of 35W, a 3.5ml cartridge, and a very simple operation.

Coated in anodized aluminium, this electronic cigarette is the very first in the world to be fitted with a supercapacitor, able to provide you with over 15.000 charge cycles and a full recharge in just a few minutes!

Dotmod's Dotstick Revo V1.5 podmod

Dotstick Revo V1.5's design

Measuring 109x21mm, this e-cigarette adopts the exact same size as its predecessor.

Indeed, if you're looking for a compact vape that can be slid into your bag or pocket, Dotmod's Dotstick Revo V1.5 will become your favorite podmod.

It is made from anodized aluminium, and for the golden Fire button, it is adorned with an LED circle.

Handling Dotmod's Dotstick Revo V1.5 podmod

A handy magnetic connector

Would you like to switch flavors in the blink of an eye? Good news, it's possible thanks to Dotmod!

Indeed, the refillable cartridge of the Dotstick Revo V1.5 is fitted with a clever magnetic system that allows you to unclip it from the podmod and replace it with a new one, filled with a different e-liquid!

The magnetic connector of Dotmod's Dotstick Revo V1.5 podmod

A beginner-friendly podmod

Forget about spending hours setting up your electronic cigarette! The Dotstick Revo V1.5 is extremely easy to use

Here, no setting of power or '+' and '-' buttons. Indeed, you'll find a Fire button, enabling you to turn the e-cigarette on or off.

Thanks to a system of automatic draw, you only have to vape from the 510 drip tip to start vaping.

Once you're at ease with your new e-cigarette, Dotmod enables you to choose from 3 power levels, that you'll select according to the value of the coil installed.

For this, push 3 times on the Fire button and choose the mode that suits you:

Thanks to its 700mAh supercapacitor, the Dotstick Revo V1.5 offers you long vaping sessions with a single charge.

And whenever you need to charge it, rest assured that it won't be long before you can start vaping again: 5 minutes is enough to fully charge your podmod!

A podmod thought for beginners

The Dotstick Revo V1.5 from Dotmod is fitted with an LED circle around the Fire button that enables you to check your battery level in real time!

• Green LED: from 100 to 61%
• Blue LED: from 60 to 21%
• Red LED: from 20 to 1%

Once your LED turns red, you need to charge your podmod by plugging the provided USB-C cable into the port below the vape and connecting the whole to an external power source. Get the Dotstick Revo charger (sold separately) to fully charge your battery in less than 5 minutes!

The charge port of Dotmod's Dotstick Revo V1.5

A rechargeable cartridge

With its 3.5ml capacity, this cartridge provides you with a great supply of e-liquid.

If you want to switch flavors with ease, you'll be happy to know that your cartridge is fitted with a handy magnetic connector system that allows you to replace it with another one, filled with different flavors. Once your cartridge is empty, insert the tip of your e-liquid bottle into the silicone strip on the side to refill it.

Exclusively compatible with Dotmod's Dotcoil DotAIO V2 coils, the cartridge of your Dotstick Revo V1.5 can only accommodate coils between 0.3 and 0.9ohm. It is not compatible with the 0.15ohm DotCoil coil.

Depending on the coil you choose, you'll enjoy either a tight (MTL) or a half-airy draw (RDL).

The cartridge of Dotmod's Dotstick Revo V1.5 podmod

An adjustable airflow

To bring more or less air to your vape and produce more or less vapor, you'll find a sliding button directly on your podmod.

Slide it to find the position that suits you best and enjoy your favorite e-liquid in the best conditions.

The airflow of Dotmod's Dotstick Revo V1.5 podmod

A handy side-fill system

Follow the steps below to proceed with the recharging of 3.5ml of e-liquid for your tank:

1. Take the cartridge out of the base
2. Lift the silicone strip on the side of the cartridge
3. Insert the tip of your e-liquid bottle into the dedicated hole
4. Fill up the cartridge
5. Close the silicone strip
6. Wait for about 10 minutes to make sure your coil is primed
7. Vape!

The side-fill system of the cartridge of Dotmod's Dotstick Revo V1.5 podmod

Contents of the box

• One Dotstick Revo V1.5 podmod
• One 3.5ml Dotstick Revo V1.5 cartridge
• One 0.7ohm DotCoil DotAIO V2 coil
• One 0.9ohm DotCoil DotAIO V2 coil
• One spare 510 drip tip
• One USB-C cable
• One user guide

The Dotstick Revo V1.5 podmod is manufactured by Dotmod.

Contents of the box of Dotmod's Dotstick Revo V1.5 podmod