Vaporesso XROS Pro Podmod

All you need to know on Vaporesso’s XROS Pro podmod in a complete and detailed video!

The XROS Pro: a podmod that matches performance and simplicity of use!

Particularly meant for enthusiasts of airy draw in direct inhaling (DL), this electronic cigarette will please vape beginners and experts. With a 0.4ohm sealed-coil cartridge, the XROS Pro has a 0.42" OLED screen giving access to a simplified setting system managed by the famous Axon chipset.

Offering three power modes, the XROS Pro podmod also has an airflow system button and a handy locking system.

Vaporesso's XROS Pro podmod

A sober look for a compact e-cig

Perfectly made by the engineers of Vaporesso, the XROS Pro pod offers a perfect ergonomy made for the hands of all vapers. Its compact and slender format (119.7*24.4*18.4) will allow you to easily slide into all your pockets and bags.

Its chic and contemporary design will accompany you all day long and, on all occasions. You'll find on this podmod:

• 1 Fire button
• 1 airflow setting button
• 1 locking button
• 1 0.42" OLED screen
• 1 USB-C recharging port

Handling of Vaporesso's XROS Pro podmod

A cartridge with a magnetic connection

Compatible with all of the XROS cartridges collection, the XROS Pro has a performing magnetic connection system offering no less than a perfect hold of your tank on its base but also allows you to switch cartridges in no time. Remember to take a pack of cartridges to alternate the flavors of e-liquid all day long!

Vaporesso delivers its XROS Pro with two cartridges, with one pre-installed, of a 3ml capacity and each one with a built-in battery of 0.4ohm.

The magnetic connection of Vaporesso's XROS Pro podmod

A power up to 30W

Not only the Fire button of your XROS Pro will allow you to activate the vape by drawing into the mouthpiece, but that's not all! Through this main button and the 0.42" OLED screen, you can navigate between different setting modes thanks to an intuitive system handled by the performing Axon chipset.

According to the type of cartridge connected to your XROS Pro, you'll have access to a different setting mode:

• You use the cartridges included in the box of the podmod with a sealed coil of 0.4ohm and a 3ml tank: push on the Fire button 3 times. The screen will show the power setting mode, from 5 to 30W
• You use the XROS cartridges (sold separately) with a sealed coil with a higher or equivalent value of 0.6ohm: push 3 times on the main supply button. The AXON chipset will offer 3 vape modes to select according to your vape preferences: POWER (P), NORMAL (N), or ECO (E)

Tip: the more you wish to enjoy an airy draw, in other words cloudy, the more the value of the built-in coil will have to be low. The 0.4ohm XROS Pro cartridges included on the podmod box are the ideal ally for enthusiasts of XXL vapor production.

The 0.42" OLED screen of Vaporesso's XROS Pro podmod

1,200mAh rechargeable by USB-C

So you can offer long vape hours as cloudy as it is tasty, Vaporesso equipped its XROS Pro with a built-in battery of 1,200mAh.

Once you've used up this comfortable capacity, all you need to do is take the USB-C cable included in the podmod box and connect it to the dedicated port on the underside of your electronic cigarette. Vaporesso guarantees a full charge of 1,200mAh in a record time of 35 minutes.

Battery capacity is indicated by a bright light below the XROS Pro display. To show or hide it, press the power switch twice:

• Green LED: capacity between 70% and 100%
• Blue LED: between 30% and 70%
• Red LED: between 0% and 30%

The USB-C recharging port of Vaporesso's XROS Pro

The XROS Pro cartridge

Specially made for your podmod, the XROS Pro cartridge presents a tank that can hold up to 3ml of e-liquid. To satisfy the vape beginners and experts looking for handy and worry-free equipment, Vaporesso gave it a built-in coil.

This disposable cartridge has to be replaced by a new one once the sealed coil is used. Vaporesso guarantees a life expectancy equivalent to 20ml of e-liquid.

The 3ml 0.4ohm cartridge of Vaporesso's XROS Pro podmod

A coil meant for an airy draw

Perfectly sealed in the XROS Pro cartridge, the 0.4ohm coil will offer you an airy draw in direct inhaling (DL). Vaporesso also equips its podmod with the COREX Heating Tech system, delivering even more intense tastes during your cloud-chasing sessions.

After two to three weeks of use, or around 20ml of e-liquid used, the coil will show some signs of wear (loss of taste, slightly burnt taste). It will then be time to change the entire cartridge for a new one.

Two handy buttons: airflow and locking

One is located on one of the sides of the podmod, and the other one is on the opposite side of the supply button.

• The first one, on the XROS Pro side, is meant for the locking of your podmod. This handy system will allow you to slide your podmod into your pockets, without having to turn it off
• The second one, located on the back side of the podmod, will allow you to adjust the air intake under the cartridge. According to your vape preferences, you'll go from an airy vape to a more restrictive draw in no time, simply by sliding this button on this airflow setting button

The airflow setting button of Vaporesso's XROS Pro podmod

A top-filling system

To make things even simpler, Vaporesso has equipped its XROS Pro with a top-filling system, so you don't have to remove the cartridge from its magnetic base when it's time to refill with e-liquid.

Once the 3ml of the tank is used, take the bottle of your favorite e-liquid, then:

1. Take the cap of the cartridge: slightly push it to tilt it
2. Insert the tip of your bottle into the filling hole, the one covered with a red silicon strip
3. Pour your e-liquid
4. Fix the mouthpiece of the cartridge
5. Warning: wait for 5 to 10 minutes before vaping if you use a new coil so the latter is correctly primed in e-liquid

Top filling of the cartridge of Vaporesso's XROS Pro podmod

Contents of the box

• 1 XROS Pro podmod
• 2 3ml 0.4ohm cartridges (with one pre-installed)
• 1 USB-C recharging cable
• 1 user guide

The XROS Pro podmod is made by Vaporesso.

The contents of the box of Vaporesso's XROS Pro podmod