SXmini Puremax Signature Podmod

The famous manufacturer SXmini comes back with a new version of the PureMax podmod in an elegant version with an aluminum alloy cover in a baroque style.

Its chipset by Yihi delivers no less than 25W of power. To allow you to vape during long sessions, you'll find a 1,050mAh capacity with a rechargeable built-in battery with the USB-C port under the podmod.

This PureMax Signature podmod goes with 2ml PX Pro cartridges. It is delivered with two 0.6ohm PX Pro cartridges meant for a tight draw in indirect inhaling (MTL) or slightly more airy in restrictive direct inhaling (RDL). Disposable, you only have to throw out your used cartridge and coils before replacing it with a new one.

SXmini's PureMax Signature podmod

A rock-solid elegance

Dressed in an engraved aluminum alloy, the PureMax Signature podmod stands out from the rest of your electronic cigarette collection. Its oval shape, 94 x 19 x 26mm dimensions, and 55g weight make it easy to handle and carry in your pocket or purse.

On its edge, you'll find a simple on/off switch, an LED system enabling you to view the selected wattage or remaining battery level, and a sliding airflow switch.

Handling of SXmini's PureMax Signature podmod

A podmod meant for beginners

The SXmini brand has the choice of offering a podmod in the simplest way possible to convince all types of vapers. Here, you don't need to set the power in Watts. You'll find an automatic adjustment of the power according to the cartridge installed. You can choose between several power levels: low, medium, high, or boost.

A handy Pure mode

The manufacturer offers its Pure mode to avoid dry hits, without vaping e-liquid, and that will allow you a longer lifespan for your cartridge and its sealed coil.

The LED system of SXmini's PureMax Signature podmod

1,050mAh of capacity

Allowing you to vape your favorite e-liquid for long vape sessions, the brand opted for a 1,050mAh battery.

The LED system will display the level of battery left:

• 4 LED: 75 - 100%
• 3 LED: 50 - 75%
• 2 LED: 25 - 50%
• 1 LED: 0 - 25%

As soon as you need to recharge your podmod, you can count on a USB-C port located below the electronic cigarette and on the cable included.

The recharging port of SXmini's PureMax Signature podmod

The PX Pro cartridge

Never resting on its laurels, the brand SXmini presents a 2.0 version of its famous PX Pro cartridge. Benefiting from a better filling system, you'll find the 4ml capacity.

The PX Pro cartridge of SXmini's PureMax Signature podmod

To connect it to the podmod, you'll have to make it slide and benefit from a powerful and safe connection. These cartridges are included with sealed coils so you only need to throw all out before replacing it.

The connection of the PX Pro cartridge with SXmini's PureMax Signature podmod

An airflow with a simple setting

To set the airflow in your vape, you only have to slide the top button. The more the holes are visible, the more the airflow is high and your vape will be airy.

The airflow button of SXmini's PureMax Signature podmod

How to fill the PX Pro cartridge?

By reworking the filling system of these PX cartridges, the brand makes filling even easier. Find out how to fill up with e-liquid by following the guide below:

1. Remove the cartridge from the battery
2. Rotate the drip tip and slide out the door
3. Insert the dropper tip of your bottle into the opening
4. Fill up
5. Close it again
6. Rotate the drip tip
7. Connect the cartridge to the podmod

N.B.: If you're using a new cartridge, please wait a few minutes for the coil to prime itself.

The filling of SXmini's PX Pro cartridge

Box contents

• 1 PureMax podmod
• 2 0.6ohm PX Pro cartridges
• 1 510 drip tip
• 1 USB-C cable
• 1 user guide

The PureMax podmod is made by the brand SXmini.

Box contents of SXmini's PureMax Signature podmod