Geekvape Aegis Boost 3 Podmod

The Aegis Boost 3 podmod and its 'Smart Lock' system to discover in this video

Geekvape presents the new version of the Aegis Boost 3 podmod with a maximum power of 60W and an IP68 certification.

This electronic cigarette adopts the innovative locking system called 'Touch Lock'. As soon as you take it in hand, it unlocks, and vice versa when you release it.

It has a 3,000mAh built-in battery allowing you to vape during long vape sessions.

It is compatible with the empty Aegis Boost 2 cartridges (one included) and the different B Series coils (0.2 and 0.6ohm included).

Geekvape's Aegis Boost 3 podmod

The design of Aegis Boost 3 podmod

The podmod's dimensions are 121.5 x 42.5 x 27.6mm, and it weighs just 159.1g. So you can carry it easily in your pocket or handbag, for example.

The front panel is made from the following components:

• An ergonomic Fire switch
• A 0.96” color display
• Two adjustment switches
• A USB-C port

The cartridge is perfectly built to the body of the podmod, revealing the remaining e-liquid level and the top-fill system.

Handling of Geekvape's Aegis Boost 3 podmod

The functioning of Aegis Boost 3

Made with the AS 4.0 chipset, this podmod offers several functioning modes according to your vaping level, but also your preferences and habits:

• SMART mode: automatic power setting according to the coil installed
• Power mode: manual setting of the power in Watts
• Boost mode: maximal power of the coil installed
• Memory mode: saving of your settings, 5 spots available
• Eco mode: reduction of the power when there's only 20% of battery left
• TC-TCR mode: temperature control. To use with compatible equipment

To select the mode that suits you, directly browse on the color screen thanks to the setting buttons.

The screen of Geekvape's Aegis Boost 3 podmod

This podmod is also equipped with a "Smart Lock" system allowing you to unlock the mod by simply holding it in hand.

The Smart Lock system of Geekvape's Aegis Boost 3 podmod

A 3,000mAh built-in battery

To allow you to vape during long sessions, the brand Geekvape added a 3,000mAh built-in battery to the Aegis Boost 3 podmod.

As soon as you need to proceed to the recharge of this electronic cigarette, use the USB-C cable included and connect it to the port on the front side.

The USB-C port of Geekvape's Aegis Boost 3 podmod

An Aegis Boost 2 cartridge

This podmod has the advantage of taking the same cartridges as the previous version. If you are an Aegis Boost 2 user, good news, no need to change all your stock of cartridges and coils.

Indeed, here, these are the B Series coils that will equip this podmod including two values to find in the box of this electronic cigarette.

The 5ml capacity is unchanged just like the top filling system, without having to take the cartridge off the podmod.

Geekvape's Aegis Boost 2 cartridge

The B Series coils

In order to allow you to try different draws and vape experiences, the manufacturer Geekvape made the choice to offer no less than 2 coils in this podmod's box:

• 0.2ohm B Series: for an airy draw in direct inhaling (DL). To use between 50 and 58W
• 0.6ohm B Series: for a slightly airy draw in restrictive direct inhaling (RDL). To use between 15 and 25W

As soon as you need to proceed to the replacement of your coil, being around two to three weeks, or as soon as you feel a loss of flavors or a light burnt taste, you only have to:

• Take the cartridge off the podmod
• Take the coil used coil out with the tool included in the box
• Put a new previously soaked coil
• Clip the cartridge on the podmod
• Wait for some minutes so the coil is correctly primed

A top airflow on the cartridge

To customize your vape experience and draw, you'll find a small sliding button located on top of the Boost 2 cartridge.

As a reminder, the more the holes are visible, the more the air intake is important, and your vape will be airy.

The airflow of the Boost 2 cartridge of Geekvape's Aegis Boost 3 podmod

How to fill the cartridge?

To avoid numerous handling, this cartridge is filled by the top without having to take the podmod off thanks to its top-fill system.

To fill the 5ml capacity, don't hesitate to follow the guide below:

• Lift the silicon strip
• Insert the thin tip of your e-liquid bottle into the unique hole
• Fill
• Carefully close the strip

As a reminder, if you use a new coil, wait for some minutes so it is correctly primed.

The filling of the cartridge of Geekvape's Aegis Boost 3 podmod

Box contents

• 1 3,000mAh Aegis Boost 3 podmod
• 1 5ml Boost 2 cartridge
• 1 0.2ohm B Series coil (pre-installed)
• 1 0.6ohm B Series coil
• 1 USB-C coil
• 1 key to take the coil out
• 1 bag of accessories
• 1 user guide

The Aegis Boost 3 podmod is made by Geekvape.

Box contents of Geekvape's Aegis Boost 3 podmod