Aspire Gotek Nano Podmod

Aspire offers a small podmod with 100% automatic functioning with a 1,000mAh built-in battery rechargeable by USB-C.

The Gotek Nano has a 4.5ml cartridge with a 0.6ohm sealed coil. This value is meant for a rather tight draw in indirect inhaling (MTL).

Requiring no settings, this electronic cigarette is particularly meant for vape beginners.

Aspire's Gotek Nano podmod

A light and compact podmod

This kit stands out by its rectangular format with dimensions of 80.5x40x20mm for a weight of only 57g.

Aspire bets on a finishing touch with rounded edges giving it an optimal handling.

With an entirely automatic functioning, the Gotek Nano has:

• 1 LCD screen
• 1 airflow button
• 1 USB-C port
• 1 ON/OFF switch

Handling of Aspire's Gotek Nano podmod

An automatic functioning

Without buttons or settings, the Gotek Nano is a podmod that suits vape beginners or experts.

Indeed, you only have to inhale into the mouthpiece to vape!

Aspire has already set its kit, so it delivers the optimal puff between flavor and vapor.

Note that you have access to the capacity left of your battery through the LCD screen.

The LCD screen of Aspire's Gotek Nano podmod

Tip: push 5 times to ON/OFF button to turn it on or off, located under the kit.

The ON/OFF button of Aspire's Gotek Nano podmod

A built-in battery rechargeable with USB-C

Your Gotek Nano podmod is powered by a 1,000mAh built-in battery.

Follow in real time the level of charge thanks to the indications on the LCD screen.

Is the percentage of your battery low? Get a USB-C cable included in the podmod box to easily and quickly recharge your electronic cigarette.

The USB-C port of Aspire's Gotek Nano podmod

A cartridge with a built-in coil

In addition to its compact, ergonomic format, the Gotk Nano podmod has another asset: its Gotek cartridge.

This cartridge has a 4.5ml tank, giving you plenty of e-liquid capacity.

This disposable cartridge is already equipped with a non-removable 0.6ohm coil.

The Gotek Nano podmod is compatible with the full range of Gotek cartridges, in 0.6ohm and 0.8ohm.

After two to three weeks of use, the sealed coil will show signs of wear (loss of taste, light burnt taste), at which point it's time to change the entire cartridge for a new one.

The cartridge of Aspire's Gotek Nano podmod

The cartridge is totally built-in to the body of the podmod, leaving only the mouthpiece protruding for suction.

It is also held securely in its base by a magnetic connector.

The magnetic connection system between Aspire's cartridge and Gotek Nano podmod

Adjust your draw type

Even if the functioning of your podmod is entirely automatic, Aspire lets you choose the setting of air intakes.

To easily alternate between a tight draw and a slightly more airy vape, slide the airflow button located on the podmod!

The airflow button of Aspire's Gotek Nano podmod

How to fill your tank?

To proceed to the 4.5ml filling of your tank, follow the steps below:

1. Take the cartridge off the base
2. Slightly lift the strip in orange silicon
3. Insert the thin tip of your bottle into the filling hole
4. Pour your e-liquid
5. Carefully close the strip
6. Replace the cartridge on the podmod

Wait for some minutes before vaping if you use a new cartridge, so the new coil is correctly primed with e-liquid.

The filling of Aspire's Gotek Nano podmod

Box contents

• 1 1,000mAh Gotek Nano podmod
• 1 Gotek cartridge with 0.6ohm sealed coil (pre-installed)
• 1 USB-C cable
• 1 user guide

The Gotek Nano podmod is made by Aspire.

Box contents of Aspire's Gotek Nano podmod