Voopoo Drag X2 + Argus G2 Mini Pack

Drag X2 & Argus G2 Mini: the ideal pack for all vapers!

The manufacturer Voopoo gathers in one pack two of its most successful podmods: the Drag X2 and the Argus G2 Mini.

You'll benefit from two electronic cigarettes that you can take everywhere with you and that offer different vape experiences.

The Drag X2 requires an 18650 battery (not included) and has a maximum power of 80W. This podmod with a 5ml capacity is meant for an airy vape with a draw in direct inhaling (DL).

Regarding the G2 Mini, it offers a 1,200mAh built-in battery, a 3ml capacity, and a maximum power of 30W. It stands out by its indirect draw (MTL) for a tight vape.

Voopoo's Drag X2 and G2 Mini podmods

Two different vaping solutions

With its Drag X2 and its G2 Mini, Voopoo offers two different formats that adapt to all your needs.

The X2 has dimensions of 129.8 x 28.6 x 31.8mm and a zinc alloy conception. It has a battery compartment covered by faux leather with embossed patterns.

The G2 Mini, as its name indicates, can go into all your pockets or handbags thanks to its dimensions of 115 x 25.6 x 13.4mm and a weight of only 49g.

The leather effect on Voopoo's Drag X2 podmod

How do these electronic cigarettes work?

The Drag X2

If you're looking for a complete electronic cigarette while staying simple, then the Drag X2 is made for you.

Indeed, this podmod has several functioning modes according to your ease with vaping. All the necessary information is displayed on the 0.96" TFT color screen:

• SMART mode: automatically adjust the power according to the coil used
• RBA mode: allowing you to manually set the power in Watts, from 5 to 80W
• ECO mode: saving up to 10% of battery

The screen of Voopoo's Drag X2 podmod

The G2 Mini

Specially thought to vape during all your outings, this podmod offers an automatic power adjustment according to the cartridge and the sealed coil included.

Here, there's no button. Indeed, you'll have an automatic draw that only requires you to inhale through the mouthpiece to take a puff.

Only the LED indicator will show the level of battery left.

The LED indicator of Voopoo's G2 Mini podmod

Two podmods, two supplies

A 1,200mAh built-in battery

Despite a small format, the G2 Mini podmod offers a built-in battery with a 1,200mAh capacity.

To proceed to the recharge, you only have to connect the cable included in the pack and connect it to the USB-C port under the podmod.

The USB-C port of Voopoo's G2 Mini podmod

An 18650 single-battery

Are you looking for a big capacity? Then, the Drag X2 offers a functioning thanks to an 18650 battery (not included).

To put it in place, you only have to slightly pull on the magnetic panel located on the faux-leather part. Make sure to respect the polarities.

We recommend letting it recharge your batteries on an external charger.

This podmod has a USB-C port for emergencies.

The battery compartment of Voopoo's Drag X2 podmod

The different tanks of two podmods

The PnP X DTL cartridge of the Drag X2

To accompany the Drag X2, the brand Voopoo offers a cartridge of up to 5ml of e-liquid.

It works with the PnP X coils, with two included in the pack:

• 0.15ohm PnP X (pre-installed): to use between 60 and 80W for a very airy vape in direct inhaling (DL)
• 0.3ohm PnP X: to use between 32 and 40W for a lightly airy vape in restrictive direct inhaling (RDL)

To set the draw, you only have to turn the notched ring located on top of the cartridge (top airflow).

Voopoo's PnP X DTL cartridge

How to fill the tank?

As soon as the tank is almost empty, it is time to proceed to the filling. For this, don't hesitate to follow the guide below:

1. Slightly unclip the pod cartridge
2. Lift the silicon strip located on the side of the tank
3. Insert the thin tip of your bottle and pour it up to three-quarters
4. Close the strip
5. Clip the cartridge on the podmod

If you are installing a new coil, please wait for a few minutes to prime it.

The filling of Voopoo's PnP X DTL cartridge

The Argus Top Fill cartridge of G2 Mini

Simple, here is the motto of the manufacturer Voopoo for the G2 Mini creation, and its 3ml Argus Top Fill cartridge. Indeed, no need to detach the cartridge of the podmod to proceed to the filling.

This tank is made with a sealed coil in 0.7ohm, once you feel a light burnt taste or a loss of flavors, throw it out on a dedicated compartment.

The draw adjustment is made thanks to a sliding button directly on the podmod.

Voopoo's Argus Top Fill cartridge

How to proceed to the filling?

Once it is empty, it is time to fill it with e-liquid. Without having to take it the cartridge off the podmod to offer a quick and clean filling.

Here is a guide below:

1. Take the silicon strip
2. Insert the thin tip of your e-liquid bottle
3. Fill
4. Close the silicon strip

The filling of Voopoo's Argus Top Fill cartridge

Pack contents

• 1 Drag X2 podmod
• 1 Argus G2 Mini podmod
• 1 5ml PnP X DTL cartridge
• 1 0.15ohm PnP X coil
• 1 0.3ohm PnP X coil
• 1 0.7ohm Argus Top Fill cartridge
• 1 USB-C cable
• 2 user guides

The X2 and G2 Mini podmods are made by the brand Voopoo.

Pack contents of Voopoo's Drag X2 + Argus G2 Mini