Umbrella Mods VII 22mm Clearomizer

An umbrella-shaped chamber, a steel 510 drip tip, and a bottom filling: discover the VII 22mm clearomizer!

The French brand Umbrella Mods presents its first clearomizer, the VII 22mm. Meant for a tight vape in indirect inhaling (MTL), it has a 510 drip-tip.

Its straight pyrex or its frost pyrex give a maximum capacity of 3.7ml. Its bottom-recharge system ensures a worry-free, leak-free vape.

This high-end clearomizer has a standard 510 connector so you can associate it with a mod with a 22mm diameter.

Umbrella Mods' VII 22mm clearomizer on Teslacigs' Punk II 220W mod

An original design

The manufacturer is aptly named. Hidden under the Pyrex, you'll find an original chamber in an umbrella shape giving an atypical look to your setup.

Its dimensions of 46 x 22mm and its weight of 41.5g allow you to associate it with elegance to your favorite mod thanks to a steel 510 drip-tip.

Its bottom filling system requires to take the clearomizer off the mod.

Umbrella Mods' VII 22mm clearomizer

A multitude of coils

Umbrella Mods offers 4 UMB coils included in the box of its VII clearomizer. You can find the value that suits you according to your vape habits and preferences.

You'll find:

• 2 0.65ohm UMB: To use between 18 and 25W for a tight draw in indirect inhaling (MTL)
• 2 1.1ohm UMB: To use between 8 and 12W for a very tight draw in indirect inhaling (MTL)

You'll benefit from compatibility with the AF coils of the brand Aspire.

To set your coil, you only have to:

1. Start by soaking your new coil of some e-liquid drops
2. Unclip the bottom part of the clearomizer
3. Take the coil out by pulling on it
4. Insert the new one in the compartment
5. Fill the e-liquid tank
6. Reconnect the bottom part to your AF Tank
7. Connect the clearomizer to your mod
8. Wait for some minutes before vaping it so you let the coil be correctly primed in e-liquid

An efficient and adjustable airflow

Located below on the clearomizer, the airflow allows you to quickly and easily set the airflow in your vape thanks to 5 more or less big holes.

As a reminder, the more the holes are visible, the more the airflow is important and your vape is airy.

The airflow of Umbrella Mods' VII 22mm clearomizer

How to fill the clearomizer?

To avoid any involuntary openings, the manufacturer Umbrella Mods chose a spare solution by the bottom:

To proceed to the filling of 3.7ml of capacity, you can:

1. Turn the airflow ring in a closed position
2. Pull on it to detach it
3. Lift the silicon cap
4. Insert the thin tip of your e-liquid bottle
5. Fill
6. Put the cap back
7. Reposition the bottom part

Note that you must wait for some minutes so the new coil is correctly primed.

Bottom filling of Umbrella Mods' VII 22mm clearomizer

Box contents

• 1 3.7ml VII 22mm clearomizer
• 1 3.7ml frost Pyrex
• 2 0.65ohm UMB coil
• 2 1.1ohm UMB coil
• 3 bags of spare pieces and washers
• 1 user guide

Box contents of Umbrella Mods' VII 22mm clearomizer